2020 Corratec Allroad A2 Gravel Bike 49cm Aluminum Shimano Claris

Description

The bicycles we sell are best described as "Project Bikes" that have one or more of the following issues:
- frame damage
- defective and/or worn-out parts
- parts that are missing
We don't perform any maintenance or repair work on the bicycles in our inventory. At a minimum, a bicycle purchased from us will need to be professionally assembled and inspected for safe operation. Most will also need extensive service work.
CONDITION
Our visual inspection of this bicycle was focused mainly on the structural integrity of the frame and fork, with less effort devoted to inspection of the components (cockpit, drivetrain, wheels).
Damage that
exceeds
the following common conditions is described further down in this section:
- light scratches and small dings
- minor damage to finish due to cable, heel, and chain rub
- what might be typical for a bike of this type and/or age (e.g. crank arm damage from curb and/or rock strikes, etc.)
Frame/Fork
We found damage in the following location(s):
- Shallow, but moderate size dent/scratch in non-drive side down tube
- Fork legs seem to be bent inward - making taking wheel in and out a challenge (wheel rotates fine once the wheel is in)
- Several light paint scratches on fork
- Several light paint scratches on seat tube
It's the buyer's sole responsibility, ideally in consultation with a carbon repair expert, to determine whether or not any area of carbon damage identified in this listing actually needs to be repaired in order for this bicycle to be considered safe to ride, specifically with respect to the structural integrity of the frame and fork. For expert inspection and repair of damaged carbon, we recommend Broken Carbon in Boulder, CO.
Other than the damage noted above, frame/fork in good condition.
Cockpit (tape/handlebar/stem/
seatpost/
saddle)
- Handlebars are broken. Need to be replaced
- Moderate wear to saddle
- Possibly not real Easton stem - would recommend replacing
Drivetrain (controls/brakes/derailleurs/crankset/cassette/chain)
- Moderate scuffs on crankset, otherwise drivetrain functions well
Wheelset
- Light scratches around outside of rim from what looks like a tire lever
- Front wheel out of true
Otherwise, rims are in good condition
SPECIFICATIONS
Weight: 24 lbs 3 oz
Frame: 2020 Corratec A2 Aluminum
Fork: Corratec Pro Control Disc Alloy
Drivetrain: 2 x 8 Speed
Brakes: TRP Spyre C
Shifters: Shimano Claris R2000
Front Derailleur: Shimano Claris R2000
Rear Derailleur: Shimano Claris R2000
Crankset: Shimano Claris R2000 Alloy, 50/34, 170mm
Cassette: Shimano HG50, 11-34
Handlebar: N/A (BROKEN)
Stem: Easton EC90 Carbon, 90mm (**possibly not real Easton Stem) would recommend replacing
Seatpost: Bontrager Alloy, 27.2mm
Front Axle Spacing: 12 x 100mm (Thru Axle)
Rear Axle Spacing: 12 x 142mm (Thru Axle)
Wheels: ZZYZX Alloy Clincher, 700c
GEOMETRY
Size: 49cm
Effective Top Tube: 529
Head Tube: 145
Stack: 554
Reach: 370
----- ----- ----- -----
With regard to the current state of tune and continued serviceability of the components (cockpit, drivetrain, wheels), assume the following:
- We have not checked the torque values of bolts and other fasteners on this bicycle, and it's certainly possible that some, and maybe even all, of these fasteners are not tightened to the manufacturers' recommended torque specifications, and, in fact, might actually be loose (e.g. loose enough to cause a component or small part to move unexpectedly or fall off, or otherwise cause a safety hazard and risk of personal injury or death).
- We have not checked the condition or adjustment of bearings (headset, bottom bracket, derailleur pulley, hub, freehub), and some or all might need to be adjusted or replaced.
- We have not checked the operation of drivetrain control components (shifters, brakes, derailleurs), and some or all might need to be adjusted. In the case of bikes with hydraulic brakes, the front and/or rear brake systems might need to be bled.
- We have not evaluated the condition and remaining service life of drivetrain wear components (brake pads, disc brake rotors, cables/housing, chainrings, cassette, chain), and some or all might need to be replaced.
- In the case of bikes with disc brakes, we have not checked the alignment of the rotors, and one or both might need to be trued.
- We have not checked the alignment of the wheels, and one or both might need to be trued and/or dished.
- We have not evaluated the condition of the tires or tubes, and some or all might need to be replaced. In the case of bikes with tubeless compatible rims, we have not checked to see if tubeless tape and/or tubeless valve stems are installed. In the case of bikes with tubular tires, we have not evaluated the age or condition of the tubular glue, and it's prudent to assume that the tires need to be re-glued in order achieve a safe and reliable adhesion between tires and rims.
----- ----- ----- -----
Bicycle will be partially disassembled and professionally packed prior to shipping. FedEx driver will require an in-person signature at time of delivery.