2011 Scattante XRL Road Bike 48cm Aluminum SRAM

Description

The bicycles we sell are best described as "Project Bikes" that have one or more of the following issues:
- frame damage
- defective and/or worn-out parts
- parts that are missing
We don't perform any maintenance or repair work on the bicycles in our inventory. At a minimum, a bicycle purchased from us will need to be professionally assembled and inspected for safe operation. Most will also need extensive service work.
CONDITION
Our visual inspection of this bicycle was focused mainly on the structural integrity of the frame and fork, with less effort devoted to inspection of the components (cockpit, drivetrain, wheels).
Damage that
exceeds
the following common conditions is described further down in this section:
- light scratches and small dings
- minor damage to finish due to cable, heel, and chain rub
- what might be typical for a bike of this type and/or age (e.g. crank arm damage from curb and/or rock strikes, etc.)
Frame/Fork
We found damage in the following location(s):
- Heavy corrosion on down tube bottle cage mount, chainstays at bottom bracket  & seat tube bottle cage mount.
- Small crack in cable end by rear derailleur.
Cockpit (tape/handlebar/stem/
seatpost/
saddle)
- Seat post is missing.
- Scratches on stem & handlebars.
Drivetrain (controls/brakes/derailleurs/crankset/cassette/chain)
- Shift & brake cables are missing.
- Unable to test further because of missing parts.
Wheelset
- Tires are flat & dry rotted.
- Wheel bearings are slightly rough.
- Corrosion on spoke nipples.
SPECIFICATIONS
Weight: 17 lbs 1 oz
Frame: Scattante XRL Aluminum
Fork: Scattante SL3 Carbon
Drivetrain: 20 Speed
Brakes: Shimano 105 5600
Shifters: SRAM Rival
Front Derailleur: SRAM Force
Rear Derailleur: SRAM Force
Crankset: Liteoro Edge, 53/39t, 170mm
Cassette: Shimano HG50, 12-28
Handlebar: Specialized Alloy, 42cm
Stem: Specialized Alloy, 100mm
Seatpost: MISSING, 27.2mm
Front Axle Spacing: 9x100 QR
Rear Axle Spacing: 9x130 QR
Wheels: A Class AL X 330 Aluminum
GEOMETRY
Size: 48cm
Top Tube: 500mm
Head Tube: 95mm
Seat Tube: 490mm
----- ----- ----- -----
With regard to the current state of tune and continued serviceability of the components (cockpit, drivetrain, wheels), assume the following:
- We have not checked the torque values of bolts and other fasteners on this bicycle, and it's certainly possible that some, and maybe even all, of these fasteners are not tightened to the manufacturers' recommended torque specifications, and, in fact, might actually be loose (e.g. loose enough to cause a component or small part to move unexpectedly or fall off, or otherwise cause a safety hazard and risk of personal injury or death).
- We have not checked the condition or adjustment of bearings (headset, bottom bracket, derailleur pulley, hub, freehub), and some or all might need to be adjusted or replaced.
- We have not checked the operation of drivetrain control components (shifters, brakes, derailleurs), and some or all might need to be adjusted. In the case of bikes with hydraulic brakes, the front and/or rear brake systems might need to be bled.
- We have not evaluated the condition and remaining service life of drivetrain wear components (brake pads, disc brake rotors, cables/housing, chainrings, cassette, chain), and some or all might need to be replaced.
- In the case of bikes with disc brakes, we have not checked the alignment of the rotors, and one or both might need to be trued.
- We have not checked the alignment of the wheels, and one or both might need to be trued and/or dished.
- We have not evaluated the condition of the tires or tubes, and some or all might need to be replaced. In the case of bikes with tubeless compatible rims, we have not checked to see if tubeless tape and/or tubeless valve stems are installed. In the case of bikes with tubular tires, we have not evaluated the age or condition of the tubular glue, and it's prudent to assume that the tires need to be re-glued in order achieve a safe and reliable adhesion between tires and rims.
----- ----- ----- -----
Bicycle will be partially disassembled and professionally packed prior to shipping. FedEx driver will require an in-person signature at time of delivery.